NICOLAS HADJIPANTELIS
ΧΑΤΖΗΠΑΝΤΕΛΗΣ ΝΙΚΟΛΑΣ
HADJIPANTELIS NICOLAS
...
LECTURER
Department of Civil and Environmental Engineering
Green Park
91, Aglantzias Ave.
303
22892221
-
-

    Προσωπικό Προφίλ

    Ο Νικόλας Χατζηπαντελής είναι Λέκτορας Δομοστατικής Μηχανικής στο Τμήμα Πολιτικών Μηχανικών και Μηχανικών Περιβάλλοντος του Πανεπιστημίου Κύπρου, όπου διεξάγει έρευνα στην περιοχή των μεταλλικών κατασκευών και διδάσκει τα σχετικά μαθήματα σε προπτυχιακό και μεταπτυχιακό επίπεδο.
     
    Ο Δρ. Χατζηπαντελής είναι κάτοχος διδακτορικού τίτλου στις κατασκευές από χάλυβα από το Imperial College London, για το οποίο του είχε απονεμηθεί η πλήρης υποτροφία ‘Imperial College President’s Scholarship’. Ως μέρος των προπτυχιακών σπουδών του στο University of Bristol, όπου απέκτησε πτυχίο ‘MEng in Civil Engineering with Study Abroad’ (first class honours), σπούδασε και διεξήγαγε έρευνα για ένα ακαδημαϊκό έτος στο University of California, Berkeley.
     
    Ο Δρ. Χατζηπαντέλης είναι πλήρες μέλος του Επιστημονικού και Τεχνικού Επιμελητηρίου Κύπρου (ΕΤΕΚ), Associate Member του American Society of Civil Engineers (ASCE), Graduate Member του Institution of Structural Engineers (IStructE) και επιστημονικός κριτής σημαντικών διεθνών περιοδικών δομοστατικής μηχανικής.
     
    Η ερευνητική δραστηριότητα του Δρ. Χατζηπαντέλη βρίσκεται στον τομέα των μεταλλικών κατασκευών και περιλαμβάνει πειραματικές, αριθμητικές και αναλυτικές εργασίες στις περιοχές του χάλυβα ψυχρής και θερμής έλασης, της τρισδιάστατης εκτύπωσης μεταλλικών κατασκευών (Wire Arc Additive Manufacturing) και των προεντεταμένων κατασκευών από δομικό χάλυβα. Ο Δρ. Χατζηπαντέλης συμμετείχε ενεργά στις τελικές δοκιμές φυσικής κλίμακας στην 'MX3D Bridge', την πρώτη μεταλλική τρισδιάστατα εκτυπωμένη γέφυρα στον κόσμο. Η έρευνά του έχει δημοσιευτεί σε εγνωσμένου κύρους επιστημονικά περιοδικά και διεθνή συνέδρια.

    Δημοσιεύσεις σε επιστημονικά περιοδικά

    • Hadjipantelis N, Weber B, Buchanan C & Gardner L. (2022). Description of anisotropic material response of wire and arc additively manufactured thin-walled stainless steel elements. Thin-Walled Structures, 171, 108634.
    • Kyvelou P, Nethercot DA, Hadjipantelis N, Kyprianou C & Gardner L. (2020). The evolving basis for the design of light gauge steel systems. International Journal of Structural Stability and Dynamics, 20(13), 2041008.
    • Wadee MA, Hadjipantelis N, Bazzano JB, Gardner L & Lozano-Galant JA. (2020). Stability of steel struts with externally anchored prestressed cables. Journal of Constructional Steel Research, 164:105790.
    • Hadjipantelis N, Gardner L & Wadee MA. (2019). Finite-element modeling of prestressed cold-formed steel beams. Journal of Structural Engineering, ASCE, 145(10), 04019100.
    • Hadjipantelis N, Gardner L & Wadee MA. (2019). Design of prestressed cold-formed steel beams. Thin-Walled Structures, 140:565-78.
    • Hadjipantelis N, Gardner L & Wadee MA. (2018). Prestressed cold-formed steel beams: concept and mechanical behaviour. Engineering Structures, 172:1057-72.

    Δημοσιεύσεις σε συνέδρια

    • Hadjipantelis N*, Weber B & Gardner L. (2021). Characterisation of the anisotropic response of wire and arc additively manufactured stainless steel. Proc. of 9th European Conference on Steel and Composite Structures, Eurosteel, Sheffield, UK, September 1-3, 2021. (https://doi.org/10.1002/cepa.1483)
    • Hadjipantelis N*, Kyvelou P, Gardner L & Wadee MA. (2019). Numerical modelling of prestressed composite cold-formed steel flooring systems. Proc. of 7th International Conference in Structural Engineering, Mechanics and Computation, Cape Town, South Africa, September 2-4, 2019.
    • Hadjipantelis N*, Gardner L & Wadee MA. (2018). Prestressed cold-formed steel beams – parametric studies and design recommendations. Proc. of 9th International Conference on Advances in Steel Structures, Hong Kong Institute of Steel Construction Limited, Hong Kong, China, December 5-7, 2018.
    • Hadjipantelis N*, Gardner L & Wadee MA. (2018). Prestressed cold-formed steel beams - Conceptual development. Proc. of 8th International Conference on Thin-Walled Structures, Lisbon, Portugal, July 24-27, 2018.
    • Hadjipantelis N*,+. (2018). Prestressed cold-formed steel beams. Proc. of 20th Young Researchers' Conference of the Institution of Structural Engineers, London, United Kingdom, April 10, 2018.

    *Oral presentations

    +Prize winning

    Άλλες δημοσιεύσεις

    • Hadjipantelis N. (2021). Metal 3D printing in the construction sector: prospects and challenges. The Civil Engineer. Issue July 2021. Cyprus Association of Civil Engineers.
    • Hadjipantelis N. (2019). Prestressed cold-formed steel beams. PhD Thesis. Imperial College London.

     

    Profile Information

    Dr Nicolas Hadjipantelis is Lecturer in Structural Engineering at the Department of Civil and Environmental Engineering at the University of Cyprus, where he is conducting research in the area of steel structures and is teaching courses at both undergraduate and postgraduate level.
     
    Dr Hadjipantelis holds a PhD in Steel Structures from Imperial College London, for which he was awarded an Imperial College President’s Scholarship. As part of his undergraduate studies at the University of Bristol, where he obtained a first class honours MEng degree in Civil Engineering, he studied and conducted research for an academic year at the University of California, Berkeley.
     
    Dr Hadjipantelis is a Full Member of the Cyprus Scientific and Technical Chamber (ETEK), an Associate Member of the American Society of Civil Engineers (ASCE), a Graduate Member of the Institution of Structural Engineers (IStructE) and a reviewer of several key international structural engineering journals.
     
    Detailed CV (June'21)
    The research activity of Dr Hadjipantelis lies in the area of steel structures and includes experimental, numerical and analytical work on cold-formed and hot-rolled steel, prestressed steel structures and metal 3D printing (specifically, Wire Arc Additive Manufacturing). Dr Hadjipantelis has also actively participated in the final full-scale loading tests on the MX3D Bridge, the first metal 3D printed pedestrian bridge in the world. His research is published in high-impact peer-reviewed journals and is presented at key international conferences.

    Journal Publications

    • Hadjipantelis N, Weber B, Buchanan C & Gardner L. (2022). Description of anisotropic material response of wire and arc additively manufactured thin-walled stainless steel elements. Thin-Walled Structures, 171, 108634.
    • Kyvelou P, Nethercot DA, Hadjipantelis N, Kyprianou C, Gardner L. (2020). The evolving basis for the design of light gauge steel systems. International Journal of Structural Stability and Dynamics, 20(13), 2041008.
    • Wadee MA, Hadjipantelis N, Bazzano JB, Gardner L, Lozano-Galant JA. (2020). Stability of steel struts with externally anchored prestressed cables. Journal of Constructional Steel Research, 164:105790.
    • Hadjipantelis N, Gardner L, Wadee MA. (2019). Finite-element modeling of prestressed cold-formed steel beams. Journal of Structural Engineering, ASCE, 145(10), 04019100.
    • Hadjipantelis N, Gardner L, Wadee MA. (2019). Design of prestressed cold-formed steel beams. Thin-Walled Structures, 140:565-78.
    • Hadjipantelis N, Gardner L, Wadee MA. (2018). Prestressed cold-formed steel beams: concept and mechanical behaviour. Engineering Structures, 172:1057-72.

    Conference Publications

    • Hadjipantelis N*, Weber B & Gardner L. (2021). Characterisation of the anisotropic response of wire and arc additively manufactured stainless steel. Proc. of 9th European Conference on Steel and Composite Structures, Eurosteel, Sheffield, UK, September 1-3, 2021. (https://doi.org/10.1002/cepa.1483)
    • Hadjipantelis N*, Kyvelou P, Gardner L, Wadee MA. (2019). Numerical modelling of prestressed composite cold-formed steel flooring systems. Proc. of 7th International Conference in Structural Engineering, Mechanics and Computation, Cape Town, South Africa, September 2-4, 2019.
    • Hadjipantelis N*, Gardner L, Wadee MA. (2018). Prestressed cold-formed steel beams – parametric studies and design recommendations. Proc. of 9th International Conference on Advances in Steel Structures, Hong Kong Institute of Steel Construction Limited, Hong Kong, China, December 5-7, 2018.
    • Hadjipantelis N*, Gardner L & Wadee MA. (2018). Prestressed cold-formed steel beams - Conceptual development. Proc. of 8th International Conference on Thin-Walled Structures, Lisbon, Portugal, July 24-27, 2018.
    • Hadjipantelis N*,+. (2018). Prestressed cold-formed steel beams. Proc. of 20th Young Researchers' Conference of the Institution of Structural Engineers, London, United Kingdom, April 10, 2018.

    *Oral presentations

    +Prize winning

    Other publications

    • Hadjipantelis N. (2021). Metal 3D printing in the construction sector: prospects and challenges. The Civil Engineer. Issue July 2021. Cyprus Association of Civil Engineers.
    • Hadjipantelis N. (2019). Prestressed cold-formed steel beams. PhD Thesis. Imperial College London.



    Powered by Community Builder